Back

Guides · 30 September 2026 · 8 min read

Caring for Your Mooring: Inspections, Maintenance and Staying Compliant

Caring for Your Mooring: Inspections, Maintenance and Staying Compliant

A swing mooring might look simple from the surface, just a buoy bobbing in a quiet bay, but below the waterline its components are working hard around the clock. Tides, wind, waves and the weight of your boat put constant strain on every link, and a mooring that fails in a storm can cause serious damage to your vessel and those around it.

Whether you're new to holding a mooring or have had one for decades, here's a practical guide to keeping it safe, well maintained and compliant.

Understanding your mooring

A typical swing mooring is made up of several parts. At the bottom is the sinker or anchor, often a heavy concrete block, steel weight or screw anchor. Attached to that is the ground chain, which lies on the seabed and absorbs much of the load. A riser chain then connects up to the buoy, with shackles and swivels joining each section. Finally, a strop or pennant connects the buoy to your boat.

Each of these components wears in different ways. Chain links thin as they rub against the seabed and each other. Shackles and swivels can corrode or loosen, and rope strops can chafe or degrade in sunlight. Because most of this happens underwater, problems are easy to miss without a proper inspection.

Inspection requirements

Most regional councils and harbourmasters in New Zealand require moorings to be inspected by an approved contractor at set intervals, commonly every one to two years. The exact rules vary between regions and even between harbours, so check the requirements that apply to your mooring area. Your mooring licence or permit conditions will usually set out what's needed.

During an inspection, the contractor will typically lift the mooring, check the condition of the sinker, chain, shackles and swivels, and measure wear on the chain links. They'll also confirm that the mooring is suitably sized for your vessel's length and weight. Worn components are replaced, and once the mooring passes, you'll receive a Certificate of Inspection.

Keeping your Certificate of Inspection up to date

Your Certificate of Inspection is important proof that your mooring is safe. Keep a copy somewhere handy, note the expiry date in your calendar and book your next inspection well ahead of time, especially before the busy summer season when contractors can be in high demand.

If you rent out your mooring, guests and platforms like Moorina may ask to see a current certificate. It gives everyone peace of mind and shows that you take safety seriously. An expired certificate may also affect your insurance cover, so it pays to stay on top of it.

Everyday maintenance tips

Between inspections, there's plenty you can do to keep your mooring in good shape. Check your strop or pennant regularly for chafe, and replace it at the first sign of wear. Make sure the buoy is clearly marked and in good condition so other boaties can see it. After strong winds or storms, visually check your boat's position and the mooring gear for anything unusual.

Pay attention to how your boat lies on the mooring. If it seems to be sitting differently, swinging more widely or drifting closer to neighbouring boats, it could be a sign that something has shifted below the surface. Don't wait for your next scheduled inspection; contact a contractor or your harbourmaster if you're concerned.

Matching the mooring to the boat

Moorings are designed for boats of a certain size and weight. If you upgrade to a larger boat, your existing mooring may no longer be suitable, and you may need heavier gear or a different location. The same applies when someone else uses your mooring: always check that their boat fits within the mooring's limits for length, weight and depth.

Protecting the marine environment

Traditional moorings can damage the seabed as chain drags in a circle around the sinker, scouring sensitive habitats such as seagrass beds. In some areas, eco-friendly mooring designs that keep chain off the seabed are being trialled or encouraged. Ask your contractor about options that may suit your location.

Be a good neighbour to the environment in other ways too. Never discharge sewage or waste where it's prohibited, keep fuel and oil spills to a minimum, and dispose of old mooring gear responsibly. If you notice damaged or drifting moorings, report them to your local harbourmaster.

The bottom line

Looking after your mooring is about more than ticking a compliance box. It protects your boat, your neighbours' boats and the beautiful waters we all enjoy. A little regular care, combined with timely professional inspections, means you can relax knowing your boat is secure, whether you're aboard for the weekend or away for the winter.